sm482报警l985

zhangpenghui 发表于 2015-12-16 21:39
1 E# h: q0 w0 P- E9 `7 s设备编号d2-0037-ba

7 A* }2 J" [1 ?0 a% W2台设备都与2015/5/19过保了，请提供设备完整error.log供我们分析。
8 b8 l4 R# G# g+ Q/ q) p

zhangpenghui 发表于 2015-12-16 21:39
设备编号d2-0037-ba

  T" f6 O4 ]" C- F- W5 p1 }Please provide the following information：C:\SmartSM\Log\error.log
6 o" t' c0 e) ]( G8 y

Defective MMI booting (assert failure occurred)
0 _  s  X7 Y7 w[Cause]
# c3 {9 U* I: y+ p% ?; {1.  The Windows system file is damaged
8 l/ [$ b* ^5 z: U2 g2.  The SBC board is not properly inserted into the back plane board slot
3.  The MVME 3100 board is defective (for SM machine)
+ S4 t7 z, t$ s  Applicable to SM-Series machines except for SM471 machines.
4.  Defective communication between the PCI I/O board and the CAN master board (for SMseries machines)
  Applicable to SM-Series machines except for SLM, SM471, 481, 482 machines.
[How to Check]
* Y1 k, e: Z9 w) l) g  k, l' f& J1.  Perform HDD recovery and reinstall the MMI. Then check whether the same problem occurs
6 F/ g, t$ g- o6 R5 ?2.  Remove the SBC board from the back plane board slot. Then insert it properly and check
' W* ~4 k% g7 c# o+ {whether the same problem occurs
, I; m8 U$ W) C+ r3.  Replace the MVME 3100 board and check whether the same problem occurs
) p# W: I! t, g9 ~2 d5 H4.  Remove the PCI I/O board from the back plane board slot. Then insert it properly and check
whether the same problem occurs

zhangpenghui 发表于 2015-12-17 09:02
机器关机开机没任何问题，&# ...

9 C! H( ^# X# G3 G  hPlease upload the TMR file
) `2 i# G) X; d7 r2 M0 d+ e, \